NMI+ | Nitrifying Microbial Isolates

The foundation of effective biofiltration

NMI+ contains high-performance nitrifying bacteria that convert toxic ammonia and nitrite into nitrate—forming the backbone of safe and stable aquaculture systems. It is trusted for new system start-ups, biofilter recovery, and increased production loads.

Key benefits:

• Rapid biofilter start-up and commissioning

• Reduced ammonia and nitrite spikes

• Improved system resilience during expansion or recovery

Best used with:
Ammonium Chloride for fishless cycling
Sodium Nitrite to strengthen nitrite conversion
Bloom to accelerate microbial establishment

Primary Uses

• Biofilter start-up and commissioning

• Fishless cycling

• Biofilter recovery after cleaning, power outages, or treatments

• Increasing feed rates or biomass

Typical Application

• Dose directly into biofilters or high-flow areas

• Can be used in freshwater and marine systems

Indicative Dosage

• Start-up / Cycling:
  Dose according to system volume and biofilter size (commonly applied as an initial seeding dose, followed by repeat doses during early cycling).

• Recovery / Maintenance:
  Lower repeat doses following disruption or increased load.

Exact dosing depends on system design, temperature, salinity, and loading. Technical guidance is recommended.

Best Practice

• Dissolved oxygen > 5 mg/L

• pH ideally 7.2–8.2

• Disable UV and ozone during initial colonisation (24–72 hours)

• Maintain adequate alkalinity

Best used with:
Ammonium Chloride, Sodium Nitrite, Bloom

NMI+ | Nitrifying Microbial Isolates
Available in:

1 litre (code: NMI+1000)

500 mL (code: NMI+500) bottles

125 ml (code: NMI+125) bottles