Description
RK2/XFLO UV Power Supply Unit | H11-PT-2 | 50 W Pod-Type 230 VAC Power Supply for XFLO UV Steriliser
The H11-PT-2 power supply unit is designed specifically for the XFLO Series UV steriliser systems by RK2. This compact, pod-type 230 VAC ballast/control module delivers 50 watts of output power and is engineered to operate seamlessly with the 230 VAC mains supply. It is suitable for direct replacement or integration with compatible XFLO UV units where a 50 W pod-type supply is required.
Key Features
-
50 W output power – matches the lamp/ballast specification for the intended steriliser model.
-
230 VAC input – compatible with standard 230 volt mains supply (common in Australia and many other regions).
-
Pod-type enclosure – compact design engineered for ease of installation and maintenance.
-
Designed for XFLO / RK2 systems – ensures proper electrical and mechanical compatibility with the manufacturer’s steriliser range.
-
Reliable UV-C lamp drive – maintains correct voltage/current for effective UV-C lamp operation and long lamp life.
Technical Specifications
| Specification | Value |
|---|---|
| Model | H11-PT-2 |
| Output Power | 50 W |
| Input Voltage | 230 VAC |
| Type | Pod-type power supply |
| Compatible Systems | XFLO / RK2 UV steriliser series |
Applications
-
Replacement/upgrade of power supply units for XFLO UV steriliser systems.
-
Repair or service of 50 W models within the XFLO range that specify a pod-type 230 VAC ballast.
-
Aquariums, ponds, water-features or commercial water treatment setups using the XFLO series and requiring correct electrical drive modules.
Benefits
-
Helps restore full UV-C lamp performance by ensuring correct ballast drive voltage/current.
-
Maintains system compatibility with XFLO/RK2 original design — avoids the risks of generic or mismatched ballasts.
-
Simplifies maintenance and reduces downtime by using the original specification part.
-
Ensures safe operation at 230 VAC input — critical for local compliance and reliability.
Installation & Maintenance Tips
-
Ensure power is turned off and the steriliser unit is isolated from mains before installation.
-
Verify that the replacement unit’s input voltage matches your mains supply (230 VAC).
-
Confirm lamp polarity and connections when installing the new power supply — ensure all connections are secure.
-
After installation, check lamp ignition, run-up and monitor for correct operation and no unusual noise or failure.
-
Periodically inspect for heat build-up, secure mounting, and ensure no malfunction in the drive unit.
The H11-PT-2 power supply is the essential electrical driver for 50 W XFLO / RK2 UV steriliser units operating on 230 VAC. Designed for compatibility and reliability, it ensures proper lamp performance and maintains system integrity. If you’re servicing or replacing the ballast/drive for your XFLO UV system, this part ensures you remain compliant with original engineering specifications and retain optimal steriliser performance.