Description
RK2 / XFLO Power Supply | H71-PT-2 |120 W Pod-Type 230 VAC Power Supply for XFLO UV Steriliser Systems
The H71-PT-2 is a dedicated replacement/upgrade power supply module designed for the XFLO UV steriliser series by RK2. This unit delivers 120 W output power, supports 230 VAC mains input, and adopts a compact, service-friendly “pod-type” form factor. It ensures that compatible UV-C lamps are driven correctly and safely, thereby maintaining the steriliser’s performance and reliability.
Key Features
-
120 W output power — matches the lamp drive requirement for certain mid- to high-output XFLO models.
-
230 VAC input — suitable for standard Australian mains voltage and other 230-volt regions.
-
Pod-type enclosure — compact, easy to install and maintain in UV steriliser systems.
-
OEM compatibility with XFLO / RK2 series — ensures correct electrical and mechanical integration.
-
Optimised for UV-C lamp use — provides proper drive voltage/current characteristics to maintain lamp life and output.
Technical Specifications
| Specification | Value |
|---|---|
| Model | H71-PT-2 |
| Output Power | 120 W |
| Input Voltage | 230 VAC |
| Type | Pod-type power supply |
| Intended Use | XFLO / RK2 UV Steriliser Systems |
Applications
-
Replacement or servicing of power supply units in XFLO / RK2 UV steriliser systems that require a 120 W pod-type ballast on 230 VAC.
-
Installations in aquariums, ponds, water-features or filtration systems where a 120 W UV lamp drive is required.
-
Maintenance or upgrade of UV steriliser systems in Australia (or other 230 V mains installations) seeking OEM-compliant driver modules.
Benefits
-
Maintains correct UV-C lamp performance by delivering the proper ballast drive, thereby preserving steriliser efficacy.
-
Ensures compatibility with XFLO / RK2 original specification parts, reducing risk of mismatch or reduced performance.
-
Simplifies service and replacement with a dedicated pod-type module designed for easy drop-in installation.
-
Supports reliability, longevity and safe operation of the UV steriliser system.
Installation & Maintenance Tips
-
Turn off and isolate mains power before installing or servicing the module.
-
Confirm that your system is indeed 230 VAC compatible and that the replacement matches the specification (120 W output).
-
Install securely and connect per the manufacturer’s wiring diagram. Ensure correct connections and polarity of lamp leads.
-
After installation, verify lamp ignition, monitor for stable operation and check for any unusual noise or behavior.
-
Periodically inspect the module for signs of heat build-up, loose connections, corrosion or moisture ingress.
The H71-PT-2 power supply is the correct, OEM-matched driver unit for 120 W XFLO / RK2 UV steriliser systems operating on 230 VAC. If you’re replacing or upgrading the power supply in a compatible UV steriliser unit, this part delivers the required specification, reliability and compatibility to maintain optimal system performance.